Sebo Automatic X4 Owner's Manual download pdf (Page 12)

12

TROUBLE-SHOOTING GUIDE

PROBLEM

Does not turn on

or machine shuts off

intermittently

Bag full or clog light on

or flashing &

machine shuts off

Brush light on

Brush light slowly

flashing

Brush light flashing &

machine shuts off

Up & down lights flicker

Does not pick up

Front bag door won’t

fully close

Hose doesn’t retract

after attachment tube is

inserted

REASON

1. Handle not fully inserted into the bag

housing, causing a faulty connection.

2. Not plugged into good outlet.

3. Cable worn.

4. Dust bag housing (6) not seated

fully into proper “locked” position

on top of power head.

1. Bag full.

2. Clog in airflow pathway, attach-

ment hose, attachment tube, swivel

neck or entrance to dust bag.

3. Microfilter dirty.

1. Brush worn.

1. Vacuum is stationary and in

upright locked position.

1. Brush jammed.

1. Operating on uneven floor.

1. Attachment tube not

correctly inserted.

2. Front cover not closed.

1. Cover release flap not fully closed.

2. Bag not inserted properly

3. Microfilter not properly inserted.

1. Attachment tube not properly

inserted.

SOLUTION

1. Release handle catch, push handle

down, close handle catch. See pg. 6.

2. Use another outlet.

3. Replace cable.

4. Housing release button (8) should

be snapped outward to its locked

position.

1. Replace bag. See Bag Replacement

on page 9. Also see page 4.

2. See Clog Removal on page 10.

Also see page 4.

3. Replace microfilter. See page 9

1. Replace brush. See page 9.

Also see page 4.

1. See page 7. Also see page 5.

1. Shut off the power switch, unplug

the machine and pull the obstruc-

tion from the brush roller. Also see

page 4.

1. Ignore.

1. Reinsert attachment tube, making

sure lower end of tube is in the

lower hole and handle is properly

seated over the protruding tab (22).

2. See below.

1. Reinsert bag. Lock the cover

release flap down firmly.

2. Reinsert bag with cover release

flap (5) up, until firmly latched in

bag holder (see pg. 9 figure 10).

3. Lift safety lever and insert filter with

vertical plastic ridge on filter facing

you (see pg. 9, figure 11).

1. Reinsert making sure top of handle

is pointing back and tube is fully

seated on the protruding tab (22)

on top of the dust bag housing.

Always unplug vacuum from outlet before dismantling any part of the machine!

!

1 2 ... 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments